added goober, say hello to goober

home-manager/dotfiles/.profile

@@ -0,0 +1,6 @@
+export XDG_DATA_DIRS=$XDG_DATA_DIRS:/usr/share:/var/lib/flatpak/exports/share:$HOME/.local/share/flatpak/exports/share
+
+foot --server
+if [ -z "$WAYLAND_DISPLAY" ] && [ -n "$XDG_VTNR" ] && [ "$XDG_VTNR" -eq 1 ] ; then
+    exec dbus-run-session sway
+fi

home-manager/dotfiles/cava/config

@@ -0,0 +1,279 @@
+## Configuration file for CAVA.
+# Remove the ; to change parameters.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+
+# Accepts only non-negative values.
+; framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+; autosens = 1
+; overshoot = 20
+
+# Manual sensitivity in %. If autosens is enabled, this will only be the initial value.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-512). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+; bars = 0
+; bar_width = 2
+; bar_spacing = 1
+# bar_height is only used for output in "noritake" format
+; bar_height = 32
+
+# For SDL width and space between bars is in pixels, defaults are:
+; bar_width = 20
+; bar_spacing = 5
+
+# sdl_glsl have these default values, they are only used to calulate max number of bars.
+; bar_width = 1
+; bar_spacing = 0
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+; lower_cutoff_freq = 50
+; higher_cutoff_freq = 10000
+
+
+# Seconds with no input before cava goes to sleep mode. Cava will not perform FFT or drawing and
+# only check for input once per second. Cava will wake up once input is detected. 0 = disable.
+; sleep_timer = 0
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'fifo', 'portaudio', 'pipewire', 'alsa', 'pulse', 'sndio', 'oss', 'jack' or 'shmem'
+# Defaults to 'oss', 'pipewire', 'sndio', 'jack', 'pulse', 'alsa', 'portaudio' or 'fifo', in that order, dependent on what support cava was built with.
+# On Mac it defaults to 'portaudio' or 'fifo'
+# On windows this is automatic and no input settings are needed.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio and pipewire 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+#
+# For pipewire 'source' will be the object name or object.serial of the device to capture from.
+# Both input and output devices are supported.
+#
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+# For shmem 'source' will be /squeezelite-AA:BB:CC:DD:EE:FF where 'AA:BB:CC:DD:EE:FF' will be squeezelite's MAC address
+#
+# For sndio 'source' will be a raw recording audio descriptor or a monitoring sub-device, e.g. 'rsnd/2' or 'snd/1'. Default: 'default'.
+# README.md contains further information on how to setup CAVA for sndio.
+#
+# For oss 'source' will be the path to a audio device, e.g. '/dev/dsp2'. Default: '/dev/dsp', i.e. the default audio device.
+# README.md contains further information on how to setup CAVA for OSS on FreeBSD.
+#
+# For jack 'source' will be the name of the JACK server to connect to, e.g. 'foobar'. Default: 'default'.
+# README.md contains further information on how to setup CAVA for JACK.
+#
+; method = pulse
+; source = auto
+
+method = pipewire
+source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+
+; method = shmem
+; source = /squeezelite-AA:BB:CC:DD:EE:FF
+
+; method = portaudio
+; source = auto
+
+; method = sndio
+; source = default
+
+; method = oss
+; source = /dev/dsp
+
+; method = jack
+; source = default
+
+# The options 'sample_rate', 'sample_bits', 'channels' and 'autoconnect' can be configured for some input methods:
+#   sample_rate: fifo, pipewire, sndio, oss
+#   sample_bits: fifo, pipewire, sndio, oss
+#   channels:    sndio, oss, jack
+#   autoconnect: jack
+# Other methods ignore these settings.
+#
+# For 'sndio' and 'oss' they are only preferred values, i.e. if the values are not supported
+# by the chosen audio device, the device will use other supported values instead.
+# Example: 48000, 32 and 2, but the device only supports 44100, 16 and 1, then it
+# will use 44100, 16 and 1.
+#
+; sample_rate = 44100
+; sample_bits = 16
+; channels = 2
+; autoconnect = 2
+
+
+[output]
+
+# Output method. Can be 'ncurses', 'noncurses', 'raw', 'noritake', 'sdl'
+# or 'sdl_glsl'.
+# 'noncurses' (default) uses a buffer and cursor movements to only print
+# changes from frame to frame in the terminal. Uses less resources and is less
+# prone to tearing (vsync issues) than 'ncurses'.
+#
+# 'raw' is an 8 or 16 bit (configurable via the 'bit_format' option) data
+# stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+#
+# 'noritake' outputs a bitmap in the format expected by a Noritake VFD display
+#  in graphic mode. It only support the 3000 series graphical VFDs for now.
+#
+# 'sdl' uses the Simple DirectMedia Layer to render in a graphical context.
+# 'sdl_glsl' uses SDL to create an OpenGL context. Write your own shaders or
+# use one of the predefined ones.
+; method = noncurses
+
+# Orientation of the visualization. Can be 'bottom', 'top', 'left' or 'right'.
+# Default is 'bottom'. Other orientations are only supported on sdl and ncruses
+# output. Note: many fonts have weird glyphs for 'top' and 'right' characters,
+# which can make ncurses not look right.
+; orientation = bottom
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' outputs left to right lowest to highest frequencies.
+# 'mono_option' set mono to either take input from 'left', 'right' or 'average'.
+# set 'reverse' to 1 to display frequencies the other way around.
+; channels = stereo
+; mono_option = average
+; reverse = 0
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+# sdl window size and position. -1,-1 is centered.
+; sdl_width = 1000
+; sdl_height = 500
+; sdl_x = -1
+; sdl_y= -1
+; sdl_full_screen = 0
+
+# set label on bars on the x-axis. Can be 'frequency' or 'none'. Default: 'none'
+# 'frequency' displays the lower cut off frequency of the bar above.
+# Only supported on ncurses and noncurses output.
+; xaxis = none
+
+# enable alacritty synchronized updates. 1 = on, 0 = off
+# removes flickering in alacritty terminal emulator.
+# defaults to off since the behaviour in other terminal emulators is unknown
+; alacritty_sync = 0
+
+# Shaders for sdl_glsl, located in $HOME/.config/cava/shaders
+; vertex_shader = pass_through.vert
+; fragment_shader = bar_spectrum.frag
+
+; for glsl output mode, keep rendering even if no audio
+; continuous_rendering = 0
+
+# disable console blank (screen saver) in tty
+# (Not supported on FreeBSD)
+; disable_blanking = 0
+
+# show a flat bar at the bottom of the screen when idle, 1 = on, 0 = off
+; show_idle_bar_heads = 1
+
+# show waveform instead of frequency spectrum, 1 = on, 0 = off
+; waveform = 0
+
+[color]
+
+# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires
+# a terminal that can change color definitions such as Gnome-terminal or rxvt.
+# default is to keep current terminal color
+; background = default
+; foreground = default
+
+# SDL and sdl_glsl only support hex code colors, these are the default:
+; background = '#111111'
+; foreground = '#33ffff'
+
+
+# Gradient mode, only hex defined colors are supported,
+# background must also be defined in hex or remain commented out. 1 = on, 0 = off.
+# You can define as many as 8 different colors. They range from bottom to top of screen
+gradient = 1
+gradient_count = 2
+gradient_color_1 = '#B3EBF2'
+gradient_color_2 = '#BF40BF'
+; gradient_color_3 = '#a6cc33'
+; gradient_color_4 = '#cccc33'
+; gradient_color_5 = '#cca633'
+; gradient_color_6 = '#cc8033'
+; gradient_color_7 = '#cc5933'
+; gradient_color_8 = '#cc3333'
+
+
+
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+# DEPRECATED as of 0.8.0, use noise_reduction instead
+; integral = 77
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
+; monstercat = 0
+; waves = 0
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+# DEPRECATED as of 0.8.0, use noise_reduction instead
+; gravity = 100
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+# DEPRECATED as of 0.8.0
+; ignore = 0
+
+# Noise reduction, int 0 - 100. default 77
+# the raw visualization is very noisy, this factor adjusts the integral and gravity filters to keep the signal smooth
+# 100 will be very slow and smooth, 0 will be fast but noisy.
+; noise_reduction = 77
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more than one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble

home-manager/dotfiles/cava/shaders/bar_spectrum.frag

@@ -0,0 +1,79 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+uniform int bar_width;    // bar width (configurable), not used here
+uniform int bar_spacing;    // space bewteen bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
+{
+    //create color based on fraction of this color and next color
+    float yr = (y - y_min) / (y_max - y_min);
+    return col_1 * (1.0 - yr) + col_2 * yr;
+}
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    float x = u_resolution.x * fragCoord.x;
+    int bar = int(bars_count * fragCoord.x);
+
+    //calculate a bar size
+    float bar_size = u_resolution.x / bars_count;
+
+    //the y coordinate and bar values are the same
+    float y =  bars[bar];
+
+    // make sure there is a thin line at bottom
+    if (y * u_resolution.y < 1.0)
+    {
+      y = 1.0 / u_resolution.y;
+    }
+
+    //draw the bar up to current height
+    if (y > fragCoord.y)
+    {
+        //make some space between bars basen on settings
+        if (x > (bar + 1) * (bar_size) - bar_spacing)
+        {
+            fragColor = vec4(bg_color,1.0);
+        }
+        else
+        {
+            if (gradient_count == 0)
+            {
+                fragColor = vec4(fg_color,1.0);
+            }
+            else
+            {
+                //find which color in the configured gradient we are at
+                int color = int((gradient_count - 1) * fragCoord.y);
+
+                //find where on y this and next color is supposed to be
+                float y_min = color / (gradient_count - 1.0);
+                float y_max = (color + 1.0) / (gradient_count - 1.0);
+
+                //make color
+                fragColor = vec4(normalize_C(fragCoord.y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
+            }
+        }
+    }
+    else
+    {
+        fragColor = vec4(bg_color,1.0);
+    }
+}

home-manager/dotfiles/cava/shaders/northern_lights.frag

@@ -0,0 +1,34 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+
+uniform vec3 u_resolution; // window resolution, not used here
+
+//colors, configurable in cava config file
+uniform vec3 bg_color; // background color(r,g,b) (0.0 - 1.0), not used here
+uniform vec3 fg_color; // foreground color, not used here
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    int bar = int(bars_count * fragCoord.x);
+
+    float bar_y = 1.0 - abs((fragCoord.y - 0.5)) * 2.0;
+    float y = (bars[bar]) * bar_y;
+
+    float bar_x = (fragCoord.x - float(bar) / float(bars_count)) * bars_count;
+    float bar_r = 1.0 - abs((bar_x - 0.5)) * 2;
+
+    bar_r = bar_r * bar_r * 2;
+
+    // set color
+    fragColor.r = fg_color.x * y * bar_r;
+    fragColor.g = fg_color.y * y * bar_r;
+    fragColor.b = fg_color.z * y * bar_r;
+}

home-manager/dotfiles/cava/shaders/pass_through.vert

@@ -0,0 +1,14 @@
+#version 330
+
+
+// Input vertex data, different for all executions of this shader.
+layout(location = 0) in vec3 vertexPosition_modelspace;
+
+// Output data ; will be interpolated for each fragment.
+out vec2 fragCoord;
+
+void main()
+{
+    gl_Position =  vec4(vertexPosition_modelspace,1);
+    fragCoord  = (vertexPosition_modelspace.xy+vec2(1,1))/2.0;
+}

home-manager/dotfiles/foot/foot.ini

@@ -0,0 +1,241 @@
+# -*- conf -*-
+
+# shell=$SHELL (if set, otherwise user's default shell from /etc/passwd)
+# term=foot (or xterm-256color if built with -Dterminfo=disabled)
+# login-shell=no
+
+# app-id=foot # globally set wayland app-id. Default values are "foot" and "footclient" for desktop and server mode
+# title=foot
+# locked-title=no
+
+font=CodeNewRoman Nerd Font:weight=Regular:size=14
+#font-bold=
+#font-italic=<italic variant of regular font>
+#font-bold-italic=<bold+italic variant of regular font>
+# font-size-adjustment=0.5
+# line-height=<font metrics>
+# letter-spacing=0
+# horizontal-letter-offset=0
+# vertical-letter-offset=0
+# underline-offset=<font metrics>
+# underline-thickness=<font underline thickness>
+# strikeout-thickness=<font strikeout thickness>
+# box-drawings-uses-font-glyphs=no
+# dpi-aware=no
+
+# initial-window-size-pixels=700x500  # Or,
+# initial-window-size-chars=<COLSxROWS>
+# initial-window-mode=windowed
+pad=3x3                             # optionally append 'center'
+# resize-by-cells=yes
+# resize-keep-grid=yes
+# resize-delay-ms=100
+
+# bold-text-in-bright=no
+# word-delimiters=,│`|:"'()[]{}<>
+# selection-target=primary
+# workers=<number of logical CPUs>
+# utmp-helper=/usr/lib/utempter/utempter  # When utmp backend is ‘libutempter’ (Linux)
+# utmp-helper=/usr/libexec/ulog-helper    # When utmp backend is ‘ulog’ (FreeBSD)
+
+[environment]
+# name=value
+
+[bell]
+urgent=yes
+# notify=no
+# visual=no
+# command=
+# command-focused=no
+
+# [desktop-notifications]
+# command=notify-send --wait --app-name ${app-id} --icon ${app-id} --category ${category} --urgency ${urgency} --expire-time ${expire-time} --hint STRING:image-path:${icon} --hint BOOLEAN:suppress-sound:${muted} --hint STRING:sound-name:${sound-name} --replace-id ${replace-id} ${action-argument} --print-id -- ${title} ${body}
+# command-action-argument=--action ${action-name}=${action-label}
+# close=""
+# inhibit-when-focused=yes
+
+
+[scrollback]
+# lines=1000
+# multiplier=3.0
+# indicator-position=relative
+# indicator-format=""
+
+[url]
+# launch=xdg-open ${url}
+# label-letters=sadfjklewcmpgh
+# osc8-underline=url-mode
+# protocols=http, https, ftp, ftps, file, gemini, gopher
+# uri-characters=abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789-_.,~:;/?#@!$&%*+="'()[]
+
+[cursor]
+# style=block
+# color=<inverse foreground/background>
+blink=yes
+# blink-rate=500
+# beam-thickness=1.5
+# underline-thickness=<font underline thickness>
+
+[mouse]
+# hide-when-typing=no
+# alternate-scroll-mode=yes
+
+[touch]
+# long-press-delay=400
+
+[colors]
+# alpha=1.0
+# background=242424
+# foreground=ffffff
+# flash=7f7f00
+# flash-alpha=0.5
+
+## Normal/regular colors (color palette 0-7)
+# regular0=242424  # black
+# regular1=f62b5a  # red
+# regular2=47b413  # green
+# regular3=e3c401  # yellow
+# regular4=24acd4  # blue
+# regular5=f2affd  # magenta
+# regular6=13c299  # cyan
+# regular7=e6e6e6  # white
+
+## Bright colors (color palette 8-15)
+# bright0=616161   # bright black
+# bright1=ff4d51   # bright red
+# bright2=35d450   # bright green
+# bright3=e9e836   # bright yellow
+# bright4=5dc5f8   # bright blue
+# bright5=feabf2   # bright magenta
+# bright6=24dfc4   # bright cyan
+# bright7=ffffff   # bright white
+
+## dimmed colors (see foot.ini(5) man page)
+# dim0=<not set>
+# ...
+# dim7=<not-set>
+
+## The remaining 256-color palette
+# 16 = <256-color palette #16>
+# ...
+# 255 = <256-color palette #255>
+
+## Misc colors
+# selection-foreground=<inverse foreground/background>
+# selection-background=<inverse foreground/background>
+# jump-labels=<regular0> <regular3>          # black-on-yellow
+# scrollback-indicator=<regular0> <bright4>  # black-on-bright-blue
+# search-box-no-match=<regular0> <regular1>  # black-on-red
+# search-box-match=<regular0> <regular3>     # black-on-yellow
+# urls=<regular3>
+
+[csd]
+# preferred=server
+# size=26
+# font=<primary font>
+# color=<foreground color>
+# hide-when-maximized=no
+# double-click-to-maximize=yes
+# border-width=0
+# border-color=<csd.color>
+# button-width=26
+# button-color=<background color>
+# button-minimize-color=<regular4>
+# button-maximize-color=<regular2>
+# button-close-color=<regular1>
+
+[key-bindings]
+# scrollback-up-page=Shift+Page_Up
+# scrollback-up-half-page=none
+# scrollback-up-line=none
+# scrollback-down-page=Shift+Page_Down
+# scrollback-down-half-page=none
+# scrollback-down-line=none
+# scrollback-home=none
+# scrollback-end=none
+# clipboard-copy=Control+Shift+c XF86Copy
+# clipboard-paste=Control+Shift+v XF86Paste
+# primary-paste=Shift+Insert
+# search-start=Control+Shift+r
+# font-increase=Control+plus Control+equal Control+KP_Add
+# font-decrease=Control+minus Control+KP_Subtract
+# font-reset=Control+0 Control+KP_0
+# spawn-terminal=Control+Shift+n
+# minimize=none
+# maximize=none
+# fullscreen=none
+# pipe-visible=[sh -c "xurls | fuzzel | xargs -r firefox"] none
+# pipe-scrollback=[sh -c "xurls | fuzzel | xargs -r firefox"] none
+# pipe-selected=[xargs -r firefox] none
+# pipe-command-output=[wl-copy] none # Copy last command's output to the clipboard
+# show-urls-launch=Control+Shift+o
+# show-urls-copy=none
+# show-urls-persistent=none
+# prompt-prev=Control+Shift+z
+# prompt-next=Control+Shift+x
+# unicode-input=Control+Shift+u
+# noop=none
+
+[search-bindings]
+# cancel=Control+g Control+c Escape
+# commit=Return
+# find-prev=Control+r
+# find-next=Control+s
+# cursor-left=Left Control+b
+# cursor-left-word=Control+Left Mod1+b
+# cursor-right=Right Control+f
+# cursor-right-word=Control+Right Mod1+f
+# cursor-home=Home Control+a
+# cursor-end=End Control+e
+# delete-prev=BackSpace
+# delete-prev-word=Mod1+BackSpace Control+BackSpace
+# delete-next=Delete
+# delete-next-word=Mod1+d Control+Delete
+# extend-char=Shift+Right
+# extend-to-word-boundary=Control+w Control+Shift+Right
+# extend-to-next-whitespace=Control+Shift+w
+# extend-line-down=Shift+Down
+# extend-backward-char=Shift+Left
+# extend-backward-to-word-boundary=Control+Shift+Left
+# extend-backward-to-next-whitespace=none
+# extend-line-up=Shift+Up
+# clipboard-paste=Control+v Control+Shift+v Control+y XF86Paste
+# primary-paste=Shift+Insert
+# unicode-input=none
+# quit=none
+# scrollback-up-page=Shift+Page_Up
+# scrollback-up-half-page=none
+# scrollback-up-line=none
+# scrollback-down-page=Shift+Page_Down
+# scrollback-down-half-page=none
+# scrollback-down-line=none
+# scrollback-home=none
+# scrollback-end=none
+
+[url-bindings]
+# cancel=Control+g Control+c Control+d Escape
+# toggle-url-visible=t
+
+[text-bindings]
+# \x03=Mod4+c  # Map Super+c -> Ctrl+c
+
+[mouse-bindings]
+# scrollback-up-mouse=BTN_WHEEL_BACK
+# scrollback-down-mouse=BTN_WHEEL_FORWARD
+# font-increase=Control+BTN_WHEEL_BACK
+# font-decrease=Control+BTN_WHEEL_FORWARD
+# selection-override-modifiers=Shift
+# primary-paste=BTN_MIDDLE
+# select-begin=BTN_LEFT
+# select-begin-block=Control+BTN_LEFT
+# select-extend=BTN_RIGHT
+# select-extend-character-wise=Control+BTN_RIGHT
+# select-word=BTN_LEFT-2
+# select-word-whitespace=Control+BTN_LEFT-2
+# select-quote = BTN_LEFT-3
+# select-row=BTN_LEFT-4
+
+# vim: ft=dosini
+
+[tweak]
+font-monospace-warn=no

home-manager/dotfiles/sway/config

@@ -0,0 +1,224 @@
+# Default config for sway
+#
+# Copy this to ~/.config/sway/config and edit it to your liking.
+#
+# Read `man 5 sway` for a complete reference.
+
+### Variables
+#
+# Logo key. Use Mod1 for Alt.
+set $mod Mod4
+# Home row direction keys, like vim
+set $left h
+set $down j
+set $up k
+set $right l
+# Your preferred terminal emulator
+set $term foot
+# Your preferred application launcher
+# Note: pass the final command to swaymsg so that the resulting window can be opened
+# on the original workspace that the command was run on.
+set $menu anyrun | xargs swaymsg exec --
+
+# screenshot folder
+set $screenshot_folder ~/Images/Captures\ d\'écrans/
+
+### Output configuration
+#
+# Default wallpaper (more resolutions are available in /run/current-system/sw/share/backgrounds/sway/)
+output * bg wallpapers/577806.jpg fill
+#
+# Example configuration:
+#
+#   output HDMI-A-1 resolution 1920x1080 position 1920,0
+#
+# You can get the names of your outputs by running: swaymsg -t get_outputs
+
+### Idle configuration
+#
+# Example configuration:
+#
+# exec swayidle -w \
+#          timeout 300 'swaylock -f -c 000000' \
+#
+#          timeout 600 'swaymsg "output * power off"' resume 'swaymsg "output * power on"' \
+#          before-sleep 'swaylock -f -c 000000'
+#
+# This will lock your screen after 300 seconds of inactivity, then turn off
+# your displays after another 300 seconds, and turn your screens back on when
+# resumed. It will also lock your screen before your computer goes to sleep.
+
+### Input configuration
+#
+# Example configuration:
+#
+#   input "2:14:SynPS/2_Synaptics_TouchPad" {
+#       dwt enabled
+#       tap enabled
+#       natural_scroll enabled
+#       middle_emulation enabled
+#   }
+#
+# You can get the names of your inputs by running: swaymsg -t get_inputs
+# Read `man 5 sway-input` for more information about this section.
+
+input * {
+  xkb_layout "fr,ru"
+}
+
+### Key bindings
+#
+# Basics:
+#
+    # Start a terminal
+    bindsym $mod+Return exec $term
+
+    # Kill focused window
+    bindsym $mod+Shift+q kill
+
+    # Start your launcher
+    bindsym $mod+d exec $menu
+
+    # Drag floating windows by holding down $mod and left mouse button.
+    # Resize them with right mouse button + $mod.
+    # Despite the name, also works for non-floating windows.
+    # Change normal to inverse to use left mouse button for resizing and right
+    # mouse button for dragging.
+    floating_modifier $mod normal
+
+    # Reload the configuration file
+    bindsym $mod+Shift+c reload
+
+    # Exit sway (logs you out of your Wayland session)
+    bindsym $mod+Shift+e exec swaynag -t warning -m 'You pressed the exit shortcut. Do you really want to exit sway? This will end your Wayland session.' -B 'Yes, exit sway' 'swaymsg exit'
+#
+# Moving around:
+#
+    # Move your focus around
+    bindsym $mod+$left focus left
+    bindsym $mod+$down focus down
+    bindsym $mod+$up focus up
+    bindsym $mod+$right focus right
+    # Or use $mod+[up|down|left|right]
+    bindsym $mod+Left focus left
+    bindsym $mod+Down focus down
+    bindsym $mod+Up focus up
+    bindsym $mod+Right focus right
+
+    # Move the focused window with the same, but add Shift
+    bindsym $mod+Shift+$left move left
+    bindsym $mod+Shift+$down move down
+    bindsym $mod+Shift+$up move up
+    bindsym $mod+Shift+$right move right
+    # Ditto, with arrow keys
+    bindsym $mod+Shift+Left move left
+    bindsym $mod+Shift+Down move down
+    bindsym $mod+Shift+Up move up
+    bindsym $mod+Shift+Right move right
+#
+# Workspaces:
+#
+    # Switch to workspace
+    bindsym $mod+ampersand workspace 1
+    bindsym $mod+eacute workspace 2
+    bindsym $mod+quotedbl workspace 3
+    bindsym $mod+apostrophe workspace 4
+    bindsym $mod+parenleft workspace 5
+    bindsym $mod+minus workspace 6	
+    bindsym $mod+egrave workspace 7
+    bindsym $mod+underscore workspace 8
+    bindsym $mod+ccedilla workspace 9
+    bindsym $mod+agrave workspace 10
+    # Move focused container to workspace
+    bindsym $mod+1 move container to workspace number 1
+    bindsym $mod+2 move container to workspace number 2
+    bindsym $mod+3 move container to workspace number 3
+    bindsym $mod+4 move container to workspace number 4
+    bindsym $mod+5 move container to workspace number 5
+    bindsym $mod+6 move container to workspace number 6
+    bindsym $mod+7 move container to workspace number 7
+    bindsym $mod+8 move container to workspace number 8
+    bindsym $mod+9 move container to workspace number 9
+    bindsym $mod+0 move container to workspace number 10
+    # Note: workspaces can have any name you want, not just numbers.
+    # We just use 1-10 as the default.
+#
+# Layout stuff:
+#
+    # You can "split" the current object of your focus with
+    # $mod+b or $mod+v, for horizontal and vertical splits
+    # respectively.
+    bindsym $mod+b splith
+    bindsym $mod+v splitv
+
+    # Switch the current container between different layout styles
+    bindsym $mod+s layout stacking
+    bindsym $mod+w layout tabbed
+    bindsym $mod+e layout toggle split
+
+    # Make the current focus fullscreen
+    bindsym $mod+f fullscreen
+
+    # Toggle the current focus between tiling and floating mode
+    bindsym $mod+Shift+space floating toggle
+
+    # Swap focus between the tiling area and the floating area
+    bindsym $mod+space focus mode_toggle
+
+    # Move focus to the parent container
+    bindsym $mod+a focus parent
+#
+# Scratchpad:
+#
+    # Sway has a "scratchpad", which is a bag of holding for windows.
+    # You can send windows there and get them back later.
+
+    # Move the currently focused window to the scratchpad
+    #bindsym $mod+Shift+minus move scratchpad
+
+    # Show the next scratchpad window or hide the focused scratchpad window.
+    # If there are multiple scratchpad windows, this command cycles through them.
+    #bindsym $mod+minus scratchpad show
+# useful shortcuts
+bindsym Print exec grim -g $(slurp) | wl-copy
+bindsym Ctrl+Print exec grim $screenshot_folder/$(date +'%s_grim.png')
+bindsym --locked XF86AudioMute exec wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
+bindsym --locked XF86AudioLowerVolume exec wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%- -l 1.2
+bindsym --locked XF86AudioRaiseVolume exec wpctl set-volume @DEFAULT_AUDIO_SINK@ 5%+ -l 1.2
+bindsym XF86AudioPlay exec playerctl play-pause
+bindsym XF86AudioPrev exec playerctl previous
+bindsym XF86AudioNext exec playerctl next
+#
+# Resizing containers:
+#
+mode "resize" {
+    # left will shrink the containers width
+    # right will grow the containers width
+    # up will shrink the containers height
+    # down will grow the containers height
+    bindsym $left resize shrink width 10px
+    bindsym $down resize grow height 10px
+    bindsym $up resize shrink height 10px
+    bindsym $right resize grow width 10px
+
+    # Ditto, with arrow keys
+    bindsym Left resize shrink width 10px
+    bindsym Down resize grow height 10px
+    bindsym Up resize shrink height 10px
+    bindsym Right resize grow width 10px
+
+    # Return to default mode
+    bindsym Return mode "default"
+    bindsym Escape mode "default"
+}
+bindsym $mod+r mode "resize"
+
+#
+# Status Bar:
+#
+# Read `man 5 sway-bar` for more information about this section.
+bar {
+  swaybar_command waybar
+}
+
+include /etc/sway/config.d/*

home-manager/dotfiles/waybar/config.jsonc

@@ -0,0 +1,15 @@
+{
+    "layer": "top",
+    "modules-left": ["sway/workspaces", "sway/mode"],
+    "modules-center": [],
+    "modules-right": ["wireplumber","bluetooth", "clock"],
+    "clock": {
+        "format-alt": "{:%a, %d. %b  %H:%M}"
+    },
+    "wireplumber": {
+        "format": "{volume}%",
+        "format-muted": "",
+        "max-volume": 120,
+        "scroll-step": 0.2
+    }
+}